The SUNBURNING AND UVA INTENSITY METERS are capable of measuring the UV-A and UV-B spectrum. The meter shows the intensity of UV-B (also called SUV – Sunburning UV) in Minimal Erythemal Doses per Hour (MED/Hr), the accepted clinical measure for sunburn potential. The UV-A detector measures the range between 320-400 nm, displaying irradiance in mW/cm. This unit features a hold toggle that freezes the present reading, an auto shut off meter that turns the unit off after 8 minutes with near zero reading, and 3 ft extension cables for each detector.




1850,00 EXW
  • Delivery time : 10-12 days


  • UV-B (SUV) Readout range: 0 -19.99 MED/hour
  • UV-A Readout range: 0-19.99 mW/cm²
  • Resolution: 0.01 MED/hour or mW/cm²
  • Operating temperature: 0 to 50°C
  • Power source: 9V alkaline battery
  • UV-B (SUV) Detector
    • Spectral Response 280 – 320 nm
    • Operating Temperature -10°C to 60°C
  • UV-A Detector
    • Spectral Response 320 – 400nm
    • Operating Temperature -10°C to 60°C


The UV HAZARD RADIOMETER (Ultraviolet Safety Meter) is a hand-held laboratory and industrial grade instrument that measures the UV radiation hazard to eyes and skin. A valuable safety tool for any industry that involves worker exposure to UV radiation. It is sensitive to ultraviolet radiation specified as hazardous in standards published by the American Conference of Governmental Industrial Hygienists. Those standards state that the total UV exposure in an eight-hour period should not exceed 3 milliJoules per square centimeter at 270 nm. Other wavelengths have hazardous potential related to that of 270 nm by the Spectral Weighting Function (see figure available in this menu). The Safety Meter monitors the integrated effect of all ultraviolet wavelengths from the light source.


    • UV curing industry
    • Printing
    • Spectrometry
    • Environmental testing
    • Commercial lighting
    • Semiconductor fabrication

This Ultraviolet Safety Meter comes as a hand-held unit with a self-contained detector mounted on the top panel of the meter. It is activated by a sliding ON/OFF switch. The maximum safe exposure time in hours and 1/100 parts of an hour is shown on the LCD. A reading of 10.00 hours indicates a source too weak to reach the Threshold Limit Value during 8 hour working day.


  • Spectral response Follows ACGIH SWF  250 to 400 nm
  • Viewing angle 60 degrees
  • Readout range 0.03 hours to 10.00 hours
  • Operating temperature 0 to +40°C
  • Power 9V alkaline battery (200 hour battery life)
  • Size: 15 x 8 x 3.8 cm
  • Weight: 200 grams


1585,00 EXW
  • Delivery time : 10-12 days


UV Integrator

UV INTEGRATOR  is a self-contained, high quality UV measuring instrument.

It is specially designed to measure, record and display peak UV intensity, UV dosage and temperature in the UV curing process of CD and DVD production. In the standard version it is equipped with one UV sensor and one temperature sensor for the measuring of:

    • Full UV 230 – 410 nm
    • Temp : 0° to 110° C

Due to its UV sensor and the integrated microprocessor the UV-T Integrator DVD can measure, record and display the peak UV-intensity of the total UV spectrum (mW/cm²).

Additionally, the UV-Integrator is calculating the UV-dosage (mJ/cm²) of the UV energy supplied during the time of exposure of one measuring cycle. The UV-dosage is calculated as the total Integral of UV dosage over the full UV spectral bands. An extra sensor measures temperatures from 0° to 110° C.

The two sensors are on the back of the unit which also serves as a heat shield. After completion of the measuring cycle all measuring results can be scrolled through on the built in LCD display. A special AUTO-OFF feature that turns off the unit automatically after one minute serves as energy saving and extension of the battery service life. As an option, this microprocessor integrator is additionally equipped with an USB ComPort and an evaluation software for downloading the data to a computer to show, edit and store a history of the measuring results of the entire measuring cycle as graphic charts (mW/cm²) and (mJ/cm²) and (°C/°F)


  • Spectral range: UV 230 – 410 nm (Standard)
  • Max. Power Input 0 to 5,000 mW/cm²
  • Measuring range: 0 to 110° C
  • Display: LCD, 2×16 digits
  • Display range: 0 to 36,000 mJ/cm²
  • Measuring range: 0 to 2,000 mW/cm²
  • Sampling rate: 0.005 sec (200/sec)
  • Recording cycle: 30 sec.
  • Power source: 2 x long life 3.6 V Lithium Battery
  • Power consumption: 20 µA
  • Battery service life: 2,000 hrs
  • Dimensions: 120 mm, height 6,5 mm
  • Weight: approx. 290 g
  • Operating temperature: 0 to 45° C
  • Heat protection: Heat shield on back plate
  • Base Accuracy: ± 5 %


In order to keep its full function and precision it is recommended to have re-calibration done once per year. Re-calibration will also be necessary after change of battery. PTB traceable calibration with certificate.

There are more than 25 models available. Please let us know which UV range you are interested with !!